20.5. 10:30 - 11:15 |
Nanofab interview - Meeting room C2.11 or C2.07
|
This interview is mandatory for enrollment to the Safety excursion - Nanofabrication lab.
Please bring or send (nano@ceitec.vutbr.cz) beforehand this completed form: https://nano.ceitec.cz/download/1132.
Attendance is possible in person (preferred) or online via Teams. The link will be sent to each user a day before at the latest.
|
5
|
21.5. 09:00 - 12:30 |
MIRA-STAN part 2/2
|
SEM basic training, part 2/2 (Hands-on), only for users who attended the first part. Meeting point at the microscope.
Attendees:
Alex
Yohannan,
Kaaviah
Manoharan,
AHMED
ELOZIRI
|
2
|
21.5. 13:00 - 13:50 |
Safety excursion - Nanofabrication lab
|
Please enroll in this training only in parallel with the "Nanofab interview."
Do not enroll in training ahead of time, but when you are sure you will be using nanofabrication techniques. It is possible to pass this training anytime during your access additionally (it takes place at least once a month).
Attendees:
Jeong Pil
Kim,
Kaaviah
Manoharan
|
5
|
21.5. 13:30 - 15:30 |
RIE-flourine -training
|
Before the training, you need to take a moodle course on dry etching and finish it with a quiz.
https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=30
Attendees:
Claudia
Lubrano,
AHMED
ELOZIRI,
Gubakhanim
Shahnazarova
|
3
|
21.5. 13:55 - 14:20 |
Safety excursion - Nanocharacterization lab
|
Attendees:
Peter
Kunnas,
Hyesung
Lee,
Lukas
Schretter,
Hongbo
Fu,
Vladimír
Prajzler
|
10
|
21.5. 14:25 - 14:55 |
Safety excursion - StAn lab
|
Attendees:
Aida
Fazlič,
Fateh
Bahadur,
AHMED
ELOZIRI,
Peter
Kunnas,
Hyesung
Lee,
Lukas
Schretter,
Hongbo
Fu,
Vladimír
Prajzler,
Lenka
Michlovská
|
10
|
22.5. 09:00 - 13:00 |
Verios_basic (1/2)
|
Verios_basic (1/2): training for new users, demonstration part. Prerequisite: 1) successfully completed Moodle courses <https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=148> and <https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=38> + 2) your typical sample ready for a subsequent hands-on session. Meeting point: entrance to StAn CLR labs (bldg. A, 1st floor). Bring your set of cleanroom stationery if you have one. Register one slot for the Verios_basic (2/2) hands-on session to complete the training curriculum.
Attendees:
Fateh
Bahadur,
Peter
Kunnas,
Lukas
Schretter
|
3
|
22.5. 09:00 - 09:45 |
Safety excursion Chem lab
|
The Moodle course, Advanced Chemical Laboratory is MANDATORY for Safety Excursion. https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=151
Attendees:
Aida
Fazlič,
Radha
Bhardwaj,
Sanjay
Kumar,
Claudia
Lubrano,
Hyesung
Lee,
Hongbo
Fu
|
6
|
22.5. 14:00 - 15:30 |
Verios_basic hands-on session (2/2)
|
Verios_basic hands-on session (2/2). Bring your real sample(s) with you. Prerequisite = completed Verios_basic (1/2) demonstration part of the training.
Attendees:
Lukas
Schretter
|
1
|
23.5. 09:00 - 12:30 |
MIRA-STAN part 2/2
|
SEM basic training, part 2/2 (Hands-on), only for users who attended the first part. Meeting point at the microscope.
Attendees:
AHMED
ELOZIRI
|
2
|
23.5. 12:00 - 13:30 |
Verios_basic hands-on session (2/2)
|
Verios_basic hands-on session (2/2). Bring your real sample(s) with you. Prerequisite = completed Verios_basic (1/2) demonstration part of the training.
Attendees:
Peter
Kunnas
|
1
|
23.5. 13:30 - 15:00 |
Verios_basic hands-on session (2/2)
|
Verios_basic hands-on session (2/2). Bring your real sample(s) with you. Prerequisite = completed Verios_basic (1/2) demonstration part of the training.
Attendees:
Fateh
Bahadur
|
1
|
4.6. 09:00 - 16:00 |
LiteScope MIRA StAn - Basic training
|
Basic training for LiteScope AFM-in-SEM, focused on the simultaneous topography and SEM measurement (CPEM). This training is prerequisite for other imaging modes. For more information, please refer to the moodle page: https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=166
Attendees:
Alex
Yohannan,
Kaaviah
Manoharan
|
4
|
5.6. 09:30 - 11:30 |
MIRA-STAN - EDS detector
|
Only for users with a valid Mira-STAN certificate. Meeting point at the microscope.
Attendees:
Alex
Yohannan,
Fateh
Bahadur,
Kaaviah
Manoharan
|
4
|
5.6. 09:30 - 11:30 |
ICON-SPM basic training
|
Before you assign for this practical training, complete all mandatory prerequisites on CF Moodle educational platform: https://cfmoodle.ceitec.vutbr.cz/
Two courses are mandatory:
1) Course Scanning probe microscopy basics (in section General training- Microscopy)
2) Course ICON-SPM – Bruker – Dimension ICON (in section Equipment training – Nanocharacterization laboratory)
Sign up to the CF Moodle with the same login as you use for the booking system. Enroll to the above-mentioned courses and follow the instructions within the courses. If you have difficulties with enrolling yourself to a course or any other troubles with Moodle, contact evelina.gablech@ceitec.vutbr.cz for help.
It is not possible to take part in practical training without completed mandatory prerequisites prior to the training!
Courses must be completed until 31.5.2024. User will not receive any reminder to complete the courses. Thus, it is the user's full responsibility to meet the stated prerequisites by the given deadline.
Practical training is only for 3 persons. If the capacity of the training is already full, please do not sign up.
Meeting point: Directly in the SPM laboratory.
Attendees:
Dabosmita
Paul
|
3
|
6.6. 13:00 - 17:00 |
Rigaku3-basic
|
Bring your typical sample. A1.15
Go through: https://cfmoodle.ceitec.vutbr.cz/mod/lesson/view.php?id=429
https://cfmoodle.ceitec.vutbr.cz/mod/lesson/view.php?id=444
Attendees:
Anna
Konečná,
Aida
Fazlič,
Alex
Yohannan,
Yue
Wang
|
3
|
20.6. 09:00 - 15:30 |
MIRA-STAN part 1/2
|
Users must meet all prerequisites 3 days before the training to get admitted. More details are available at Ceitec Nano Moodle: https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=76 Meeting point at the microscope. This is a two-step training, register for the part 2 in our booking system.
Attendees:
Quynh Nhu Thi
Tran,
Muhammad
Tahsin,
Roshan
Velluvakandy,
Gubakhanim
Shahnazarova
|
4
|
26.6. 09:00 - 12:30 |
MIRA-STAN part 2/2
|
SEM basic training, part 2/2 (Hands-on), only for users who attended the first part. Meeting point at the microscope.
Attendees:
Roshan
Velluvakandy,
Gubakhanim
Shahnazarova
|
2
|
27.6. 09:00 - 12:30 |
MIRA-STAN part 2/2
|
SEM basic training, part 2/2 (Hands-on), only for users who attended the first part. Meeting point at the microscope.
Attendees:
Quynh Nhu Thi
Tran,
Muhammad
Tahsin
|
2
|
27.6. 13:00 - 17:00 |
Rigaku3-basic
|
Bring your typical sample. A1.15
Go through: https://cfmoodle.ceitec.vutbr.cz/mod/lesson/view.php?id=429
https://cfmoodle.ceitec.vutbr.cz/mod/lesson/view.php?id=444
|
3
|
18.7. 09:00 - 15:30 |
MIRA-STAN part 1/2
|
Users must meet all prerequisites 3 days before the training to get admitted. More details are available at Ceitec Nano Moodle: https://cfmoodle.ceitec.vutbr.cz/course/view.php?id=76 Meeting point at the microscope. This is a two-step training, register for the part 2 in our booking system.
|
4
|
25.7. 09:00 - 12:30 |
MIRA-STAN part 2/2
|
SEM basic training, part 2/2 (Hands-on), only for users who attended the first part. Meeting point at the microscope.
|
2
|
30.7. 09:00 - 12:30 |
MIRA-STAN part 2/2
|
SEM basic training, part 2/2 (Hands-on), only for users who attended the first part. Meeting point at the microscope.
|
2
|